KIPCO INTERNATIONAL
INC.
SERVING THE TUBE & PIPE
INDUSTRY
KIPCO International is pleased to offer you this new high
frequency mill as per your requirements.
(Model: KE-2-1.00H)
SPECIFICATIONS:
MODEL NUMBER: KE-2-H
OD SIZE RANGE
SPEED: 131
– 328 FT / MIN (40m/min – 100m/min)
DRIVEN SHAFT OD: 40 mm
(1.58 inches)
COMPONENTS AND CONFIGURATION
DOUBLE SIDE
UNCOILER
-
Hydraulic
expanding mandrel
-
180 mm (7.1 inches)
Maximum coil width
-
1800 mm (70 inches)
Maximum OD
-
450-525 mm ID
(17.7-20.7 inches)
- Air brake
ACCUMULATOR
- TIGER CAGE
DESIGN
ENTRY GUIDE
- 4 roll
adjustable
FORMING SECTION
BREAK
DOWN SECTION
-
3 vertically
adjustable driven stands, with single point adjustment
-
2 horizontally
adjustable side pass stands
-
Single point of adjustment with digital read out on
vertical stands
FIN SECTION
-
3 vertically
adjustable driven stands, with single point adjustment
-
2 adjustable side
pass stands
-
seam guide assembly
WELD BOX
-
2 Side pass stands
COOLING SECTION
- Internal spray
- Holding tank with 5 hose power pump
SIZING SECTION
-
5 vertically
adjustable driven stands, with single point adjustment
-
4 side pass stands
THREE SINGLE PLANE
TURKS HEAD
- 4 roll adjustable each stand
AUTOMATIC CUTOFF SAW
- Digital length control
- 18-20 cuts per minute
- Rack & Pinion drive
MANUALS AND DRAWINGS
A
FULL SET OF MANUALS AND DRAWINGS WILL BE PROVIDED IN
ENGLISH.
-
2 ea. 75
H.P. D.C. Motors
-
-
Tach output for
welder control
Delivered, set on your
foundation, aligned and leveled, test run and one (1) week training.
Customer
responsibility: Wiring, plumbing, civil
work
KIPCO Responsibility: To ensure all components are in working
order prior to
Shipping. Set up of the mill and
to ensure proper
Operation,
Commission and training of operators for
1 week.
