KIPCO INTERNATIONAL INC.

             SERVING THE TUBE & PIPE INDUSTRY
 
                                   

 

 

 

 

KIPCO International, Inc. is pleased to offer you this new high frequency mill as per your requirements. (Model:  KE-5-4.0H)

 

 

SPECIFICATIONS:

 

MODEL NUMBER:                                      KE-5-H

OD SIZE RANGE:                                        1.0 – 4.0  INCH (25.4-101.6mm)

WALL THICKNESS RANGE:                     .047 - .197  INCH (1.2-5.0mm)

SPEED:                                                          98 – 262  FT / MIN (30 – 80m/min)                  

DRIVEN SHAFT OD:                                  70 mm (2.75  inches)

 

 

COMPONENTS AND CONFIGURATION

 

DOUBLE SIDE UNCOILER

 

-         Hydraulic expanding mandrel 

-         500 mm (19.7  inches) Maximum coil width 

-         1800 mm (70 inches) Maximum OD

-         450-525 mm ID (17.7-20.7 inches)

-         Air brake 

 

 

ACCUMULATOR

 

            -   TIGER CAGE DESIGN

 

 

ENTRY GUIDE

 

            -  4 roll adjustable

 

 

 

 

 

FORMING SECTION

             

BREAK DOWN SECTION

-         3 vertically adjustable driven stands, with single point adjustment

-         2 horizontally adjustable side pass stands

-         Single point of adjustment with digital read out on vertical stands

 

 

FIN SECTION

 

-         4 vertically adjustable driven stands, with single point adjustment

-         3 adjustable side pass stands

-         seam guide assembly

 

 

WELD BOX

 

-         2 Side pass stands         

 

 

COOLING SECTION

           

-         Internal spray

-         Holding tank with 5 hose power pump

 

 

SIZING SECTION

 

-         5 vertically adjustable driven stands, with single point adjustment

-         4 side pass stands

 

THREE SINGLE PLANE TURKS HEAD

           

            - 4 roll adjustable each stand

 

 

AUTOMATIC CUTOFF SAW

 

-         Digital length control

-         18-20  cuts per minute

-         Rack & Pinion drive

 

 

 

 

 

MANUALS AND DRAWINGS

A FULL SET OF MANUALS AND DRAWINGS WILL BE PROVIDED IN

ENGLISH.

 

 

MAIN MILL DRIVE

 

-         2 ea.  100 H.P.  D.C. Motors

-         Solid State Controllers

-         Tach output for welder control

 

 

 

Delivered, set on your foundation, aligned and leveled, test run and one (1) week training.

 

Customer responsibility:  Wiring, plumbing, civil work

 

KIPCO Responsibility:       To ensure all components are in working order prior to

                                                Shipping.  Set up of the mill and to ensure proper

                                                Operation, Commission and training of operators for

                                               1 week.

 

 

 

Back