KIPCO INTERNATIONAL INC.

SERVING THE TUBE & PIPE INDUSTRY

KIPCO INTERNATIONAL, INC. IS PLEASED TO OFFER YOU THE FOLLOWING ANTI-TWIST STANDs:

UNIT WORKS BY USING FOUR VARIABLE GEOMETRY ROLLS THAT ARE ADJUSTABLE IN AND OUT ON SLIDING MOUNTINGS. THE ROLLS ALLOW THE USER TO APPLY PRESSURE COUNTER TO THE TWISTING OF THE TUBE, PLACING THE WELD SEAM IN THE DESIRED POSITION.

UNIT CONSISTS OF THE FOLLOWING:

A FRAME IN MACHINED STEEL, WITH A ROLL HOLDER CARRIAGE SLIDE. IN THIS CARRIAGE THERE ARE FOUR SLIDING ROLL HOLDER SUPPORTS, CONTROLLED INDEPENDENTLY BY FOUR ADJUSTING SCREWS. THE ROLL MANDRELS ARE TEMPERED STEEL, AND THE FOUR ROLLS ARE SUPPLIED IN K100 STEEL WITH A HARDNESS OF 63RHC. ALL ROLL AND THRUST BEARINGS ARE SUPPLIED.

THERE ARE THREE SIZE RANGES AVAILABLE, PRICED AS FOLLOWS.

OD RANGE MAX WALL

.240 - 1.50 INCH (6-38.1mm) .120 INCH (3mm)

.60 - 3.15 INCH (15.9-80mm) .180 INCH (4.5mm)

2.0 - 4.50 INCH (50.8-114.3mm) .250 INCH (6.4mm)