KIPCO INTERNATIONAL INC.

SERVING THE TUBE & PIPE INDUSTRY

KIPCO International, INC. IS PLEASED TO OFFER YOU THE FOLLOWING WELDING SYSTEM:

· ONE TRICATHODE TORCH WITH ARC DEVIATION AND ARC OSCILLATION SET UP FOR 5/32” (4mm) ELECTRODES.

· ONE TORCH ADJUSTMENT GROUP GIVING THREE-AXIS ADJUSTMENT.

· ONE MASTER CONTROL PANEL WITH ALL NECESSARY CONTROLS AT THE OPERATORS REACH.

· ONE HI-FREQUENCY STARTER CONTROL CABINET WITH AN ARC STARTER FOR EACH ELECTRODE.

· ONE AUXILIARY CONTROL CABINET FOR POWER SUPPLIES, TORCH COOLANT, AND CONTROL POWER TRANSFORMERS.

ALL INTER-CONNECTING CABLES TO ALL SUPPLIED EQUIPMENT.

UNIT INCLUDES:

s Central Operators Station

A) Separate Control of each Torch

B) Volt and Amp Digital Read Out

C) Control of Magnetic Deviation and Arc Oscillation

D) Six Gas Flow Control Stations

E) Gas Pre-Flow and Post-Flow Control

F) Integrated Mill Start / Stop and Emergency Stop

G) Cooling Water and Gas Flow Indicators

s Three Axis Torch Positioning Device with Individual Height Control of each Torch

s Central Gas, Power and Flow Control Station

s TTT - Torch with 400 Amp / Torch Capacity

s Hi Frequency Starter Control Cabinet with an Arc Starter for each Electrode

s Auxiliary Control Cabinet for Weld Power Supplies, Auxiliary Cooling and System Interface

s One Master Control Panel with all necessary controls at THE OPERATOR’S REACH. .

s All inter-connecting cables to all supplied equipment.

USER MUST SUPPLY THE FOLLOWING ITEMS.

1. A GAS MIXER FOR ARGON/HYDROGEN 95/5. (CAN BE QUOTED BY KIPCO)

2. A SUPPLY OF ARGON AND HYDROGEN AT 50 PSIG.

3. WELD BOX THAT WILL GIVE PROPER SEAM PRESENTATION. . (CAN BE QUOTED BY KIPCO)

4. A WATER COOLER FOR THE SYSTEM OF AT LEAST 1 GAL/MIN . (CAN BE QUOTED BY KIPCO)

5. WIRING OF THE AUXILIARY CABINET TO YOUR POWER SUPPLY.

6. INSTALLATION OF TORCH MOUNTING SYSTEM AND CONTROL CABINET

IN YOUR DESIRED LOCATION.

7. THREE 400 AMP WELDING POWER SUPPLIES. . (CAN BE QUOTED BY KIPCO)